Pack of 4 · 8–15 mm · Engineered in the USA
Camp chair end caps
One part, eight sizes. Pick the inside diameter of your chair tube and we will send four caps that press in and stay in.
Select
Pick your size
8–13 mm fits most camp chairs
Measured outside 8–15 mm? Ask us for that size — we make them to order.
Selected
10 mm
tube inside diameter
| Pole inside Ø | 10 mm |
|---|---|
| Cap head Ø | 14 mm |
| Length | 27.5 mm |
| Pack quantity | 4 |
| SKU | MLAB-EC-10MM-4PK |
| GTIN-12 | 860016549920 |
Not every tube on a chair is the same size. Measure each one you are replacing.
Not sure of your size? Find your size or print the measuring guide.
Your measurement will not be exact
Tube sizes vary between makes, and a tube that has been in use is usually a little out of round. In our testing a reading almost never matches a size exactly.
Round down to the nearest size we make. A measured 11.70 mm takes the 11 mm cap. A little under is fine — the head is 4 mm wider than the bore, so it still seats on the tube end, and the bungee holds the cap in. Go too far under and the head pulls straight through instead of seating.
The part
What you get
In the pack
- Four caps, all the same size, in a better performing material
- Every cap is 27.5 mm long
- Head diameter is 4 mm over the tube bore, so it seats on the tube end
- Topper printed with an actual-size ruler, so you can re-check your size against the caps in the bag
- Engineered in the USA
How it works
Why it stays in
The body matches the tube bore for a press fit, the head stops against the tube end and takes the cord load, and the cord anchors inside the cap.
Sizes
All 8 sizes
All dimensions in mm · Every cap is 27.5 mm long · Pack of 4 · Between two sizes, choose the smaller — the bungee is what holds the cap in.
Not sure of your size?
Print the free guide and stand your old cap on the actual-size outlines, or measure straight across the inside of the tube.
PDF · 2 pages · US Letter · free, no signup
Back in service
Four caps, and the chair is usable again
